The Add Part(s) button within the Parts Management section of Asset Bulk Part Change will always be active (never disabled).
This button is used for the following operations:
Add brand new part(s) by selecting the product (SAM1: Add New Part)
Add brand new part(s) by copying from another piece of equipment (SAM1: Import)
Add existing (parked) parts assigned on site (SAM1: Refit Parked Parts).
Add existing (rebuilt) parts assigned on site (SAM1: Refit rebuilt parts)
When the operator selects the “Add Parts” button, this will reveal the “Add Parts” modal which is exampled to the right →
Within this modal control, the user can select method for how parts are to be selected and added to the asset and then conduct a search to find the appropriate part or parts.
This process will allow for multiple different parts to be added to the underlying asset, as well as adding the same part multiple times in multiple configurations.
The form contains the following sections:
Asset and Site Summaries - as per other modals in the SAM2 system - Asset info is displayed at the top of the form.
Add Part(s) From - This section contains the three different options for adding parts to the selected asset. Within the body of this section are three large radio button controls;
Product List (New / Rebuilt) - Will allow the user to search for any product and create a new part against the selected asset from one of those products.
Copy from Another Asset - Will allow the user to select another asset and create new part(s) from the parts that are assigned to that asset.
Add Parked Parts - Will allow the user to add a part to the selected asset that are currently “parked” against the site (or another site)
In response to selecting each of these three options, the parameters / results functionality will be updated.
Apply Filters and Search button - in the footer section of the form is the Search button. Once parameters have been submitted, the results will be displayed in the second tab.
